The pressure transducer calibration kit uses an analog manometer to calibrate an MPS20N0040D pressure transducer using 2.5mm tubing and a tee junction. When the tee junction is put under a given pressure, the manometer water level changes accordingly, as does the signal produced by the pressure transducer. The water level can be measured and approximated as a pressure (-2kPa - +2kPa measurement range).

Included in the Pressure Transducer Calibration Kit:

• 1x 3D Printed Manometer

• 2.5mm x 4mm Tubing (3m in length)

• 1x MPS20N0040D Pressure Transducer

• 4mm Tee Junction

• 4x Jumper Wires

• 1x Mini Breadboard

Some Features of the Pressure Transducer Kit:

• -2kPa to 2kPa Calibration Range from Manometer

• 0kPa - 30kPa (approximate) Operating Range for MPS20N0040D

• 4mm Tee Junction Connects MPS20N0040D and Manometer

• MPS20N0040D compatible with Arduino + Raspberry Pi

• MPS20N0040D Operates at 5V